BAB Technologie - ELM en

ELM en - 4 Seiten

BAB Technologie - ELM en - Cover

Ein Service von FLIPEDIA powered by MultiFlip
Sie haben möglicherweise JavaScript deaktiviert oder verwenden eine ältere Version des Adobe Flash Players.
Zur Optimierung von Suchergebnissen finden Sie im Folgenden einen Textauszug aus dem Katalog "ELM en" der Firma BAB Technologie:

FLIPEDIA - Kataloge genial einfach.


ELMMODULE EMERGENCY LIGHTING MONITORING. The ELMMODULE is designed to monitor the emergency lightning by means of the ABB DGNS 1.16.1. It facilitates the manual/automatic triggering of emergency lighting tests for DALI emergency lighting ballasts. Further it captures the results of these tests and enables the user to view, download and print the most recent results of selected areas of the building. The triggered tests are available for DALI emergency luminaires are as follows: · Function test: This will simulate a power failure to the luminaire, forcing the lamp to enter an emergency state, powering the lamp by the integrated battery for 30 seconds. · Partial Duration test: This will put the luminaire in a full power failure state for half of the rated duration of the battery (usually 1.5 hours). · Full Duration test: This will put the luminaire in a full power failure state for the full rated duration of the battery (usually 3 hours). · Battery test: This will, upon completion of a duration test, indicate the current charge state of the battery. The system will log the most recent result or each type of test for each ballast and display those results in a report generated using a interface.

PRODUCT APPLICATION THE ELMMODULE IN OPERATION ELMMODULE DISPLAYING A TEST PROTOCOL OVERVIEW TECHNICAL DATA Artikel Nr.: 10580 · · · · · · · · Operating voltage: 12­32V DC Typical power consumption: 300 mA at 12 V Power consumption: <= 5 W Connections: Power over Ethernet (PoE) or power supply via pluggable screw terminal Environmental conditions: EN 50090-2-2 Ambient temperature: ­5 bis + 35 °C Storage temperature: ­10 bis + 60 °C Relative humidity (non-condensing): 5 % bis 80 % Mechanical Data: Mounting: MDRC 4 MW Dimensions (W x H x D) in mm: 70 x 90 x 63 Housing: Plastic Protection type: IP20 (acc. to EN 60529) Interfaces · Ethernet via RJ45 connector · SD-Card-Slot: Card has to be plugged in permanently · KNX®/TP- and EnOcean® connection pending preparation Features: · Limited to 35 ABB DGNS 1.16.1 gateways Software requirements: · Operating system: independent · Communication: network interface · Browser: current standard browser · · · · The specifications in the flyer refer to the current production status of the devices. We reserve the right to make changes with regard to technology and design. Our General Terms and Conditions of Sale, Delivery and Payment shall apply exclusively.

b.a.b-technologie GmbH Inhouse Dortmund Rosemeyerstrasse 14 44139 Dortmund, Germany Phone: +49 231 476425­30 Fax: +49 231 476425­59 E-mail: Internet:


Flipping-Engine: MultiFlip